Krones Bottling line, year 2006, for:
– Still and carbonated water with 8g CO²/l, filling temperature 20°C
– Ice tea still with filling temperature 20°C
– Juice based beverages with 15% juice without pulp, without gas, filling temp. 20°C
Actual output capacity:
– 13,600 bph @ 0.5L PET bottles
– 12,000 bph @ 1.0L PET bottles
– 10,000 bph @ 1.5L PET bottles
Consisting of:
* Blow-moulding-Filler-Capper-Labelling-Bloc:
* Krones Contiform II S08 reheat stretch blow moulding machine
– incl. chiller unit, tilting device KIPP 1CF and preform infeed
* Krones Mecafill VKP-PET 1.800-55-103 Filler;
– 55 filling valves, pitch 103mm, R-L
– with cap conveyor, neck ring guiding, filler flush from outside,
– Sterile air filter without steam sterilisation, bottom cooling unit
* Krones Capper;
– 11 capping station
– pitch 103mm
– Pick&Place take-over
– thread flushing
– operator platform for cap sorting unit
– UV-radiation with infeed
* Krones Canmatic 720-15 Labeller
– bottle infeed equipped for 2 infeed worms
– L-R operation
– Angle arrangement
– Full safety hinged doors
* Krones Checkmat FE-IR Fill height control
– Infrared
* Videojet Excel 170i Date Printer (ink coding on cap)
* Krones Synco bottle conveyor, with plastic chain
* Dimag Star F30 Shrink Packer
– 4 lane bottle infeed
– film only
– 3×2 and 4×3 packs
* Pack conveyor; plate chain with motor drive
* Krones Contiflow 15/2 Mixer
– 2-components
– mixture ratio 1+3 – 1+10
* Atelier Francois CE46A 40bar compressor system
– 1.160 Nm³/h
– incl. chiller and air dryer
The line has been disconnected and dismantled in October 2017 and has been stored in warehouse. Can no longer be seen in operation.
